 |
 |
Baileigh Industrial manufactures the RMD line of Rotary Tube and Pipe Benders, Notchers, Tube End Formers, and Horizontal Benders. A partial list of RMD Tube and Pipe equipment is described below:Baileigh Industrial manufactures the RMD line of Rotary Tube and Pipe Benders, Notchers, Tube End Formers, and Horizontal BendersA partial list of RMD Tube and Pipe equipment is described below:
Model 400-S
- Servo motion control
- Stores over 100 programs
- Maximum capacity is 2.5” Schedule 40 pipe, 3” tube
- Utilizes a portable cart with wheels for easy mobilization around the job site or shop.
Model 300-SModel 300-P
- Programmable electric bender
- Maximum capacity is 2” Schedule 40 pipe, 2.5” tube
- Utilizes a portable cart with wheels for easy mobilization around the job site or shop.
- The remote operator interface gives the operator total control of the bend
- Programmable electric bender
- Maximum capacity is 2” Schedule 40 pipe, 2.5” tube
- Utilizes a portable cart with wheels for easy mobilization around the job site or shop.
Model 200-S
- Programmable electric bender
- Maximum capacity is 1.5” Schedule 40 pipe, 2” tube
Model 150-SModel 100-S
- Bend up to 206 degrees without stopping or ratcheting
- Maximum capacity is 1 ½” Schedule 40 pipe, 2” tube
- Manual rotary bender
- Maximum capacity is 1” Schedule 40 pipe, 1” square tubing, 1 ¾” tube (.095” wall mild steel)
- Unique ratcheting mechanism allows you to bend easily by simply pulling a lever. Each pull will deliver 10 degrees of movement.
Model IDX-10 Positioning Table
- Can be fitted to bender models 200, 300 and 400
Tube and Pipe Notcher
Model 800 Tube and Pipe Notcher - Eccentric Cut
- Mill type notches that uses only one end to mill to notch from mill size, up to 3” without changing tooling.
- Operator adjusted eccentric path requires only one cutter to notch weld joints on tubing, pipe, or solids with outside diameters of 1.00” to 3.00”. This unique feature means cost savings are ongoing. Notching under 1.00” is achieved by installing the optional .50” cutter and adapter bushings for notches up to 1.00”.
- Large single-direction handwheel allows user to feed cutter through an eccentric path crating a precision weld joint with one quick pass, saving time and money.
- Eccentric cut can be used to plunge or cut holes through tubing wall or used for applications that require perfect weld joints to connect passage ways for air or fluids, reducing the need for expensive tees and elbows.
- Create perfect weld joints in chromolly, mild steel stainless steel and aluminum.
Horizontal Bending Press
Notching examples from the Model 800 Eccentric Cut Machine:
Contact Metalworking Machinery Systems for more information on these dependable tube and pipe processing machines from RMD - Baileigh .
 |
 |
 |
